A passive 2-way loudspeaker, featuring the Ojas 1506 Multisectoral horn. Handcrafted in Hope, Arkansas, USA by Klipsch artisans in collaboration with OJAS. Built from 13-ply Grade A Baltic birch plywood the cabinet houses the K-33-E 15” woofer in a vented enclosure, crossed over at 760Hz to the K-706 HF compression driver loaded on an exposed sand cast aluminum multi-sectoral horn. Features include anodized aluminum binding posts, anti-vibration rubber feet, an engraved metal ID plate, and a five-step high-frequency HF gain attenuator. Available in pairs of spiral red oak veneer or Hammertone Gray finish with a matte black horn. The kO-R2 is available for pre-order, shipping between August and October, in the order they were received. We are producing and shipping in four lots, which will ship approximately 3 weeks apart. Following purchase, customers will receive an order confirmation with their lot number (1-4) and be added to a dedicated production update sequence, with communications covering (in this approximate order) the receipt of the horns in Hope AR, crossover build completion, cabinet construction, assembly, final acoustical testing, shipping, and setup guidance upon arrival. Our goal is for you to know as much as we do about the status of your speaker build. Frequency Response: 39Hz – 20kHz ±3dB Frequency Response: (f10): 29 Hz - 21kHz -10dB Power Handling: 300W (34.6V) 40 Hz - 10kHz Calculated Max. Continuous Output: 118db 40 Hz - 10kHz Sensitivity: 97dB sensitivity at 2.83V/1m Crossover Point: 760 Hz Horizontal Coverage Pattern: 90 degrees, +/- 30 degress, 500Hz to 20kHz Vertical Coverage Pattern: 70 degrees, +/- 20 degress, 3kHz to 20kHz Nominal Impedance: 8 ohm (4.2 ohm min. @ 100 Hz) Transducers: K-33-E 15” Woofer; K-706 HF Driver Enclosure: vented system Enclosure Material: 13-ply Grade A Baltic Birch Plywood Terminals: 5 way binding posts Dimensions: 25.375” (64.45cm) W x 45.5” ( 115.5cm) H x 22.25” (56.5cm) D Net Weight: 120.5 lbs. (54.65kg) Shipping Weight: 134 lbs (60.78kg)